Metal
|
Mechanical Drawing, Theoretical, Practical, Mechanical, Metallurgy and
Welding for Metals
|
Metal
|
Engineering Ceramics processing, heat treatment of silicon nitride and sialon based ceramics and glasses with different sintering additives. The testing of mechanical and chemical properties, oxidation, including hardness, toughness, strength, X-ray analysis by powder methods using Hägg-Guinier focusing camera, Philiphs Powder diffractometer. Microstructural analysis by using Hitachi Scanning Electron Microscope, operating both in secondary and back scattered imaging modes for engineering ceramics. |
Doctor of Philosophy
(PhD)
|
"Development and Application of Vacuum Heat-Treated Silicon Nitride Ceramics"
Vedat Demir, University of Newcastle Upon Tyne, Faculty of Engineering, Mechanical, Materials and Manufacturing Engineering Department, Material Division, Newcastle Upon Tyne, the UK, December 1999
|
Master of Philosophy (MPhil)
|
"Vacuum and Hydrogen Heat-Treated Pressureless Sintered Si3N4 Ceramics"
Vedat Demir, University of Newcastle Upon Tyne, Faculty of Engineering, Mechanical, Materials and Manufacturing Engineering Department, Material Division, Newcastle Upon Tyne, the UK, April 1996
|
Master of Science (MSc)
|
"Investigation Wear Behaviours of Polymeric Materials Against Spherical Castings"
Yusuf Taşdelen, Zonguldak Karaelmas Üniversitesi, Fen Bilimleri Enstitüsü, Metal Eğitimi Anabilim Dalında Bilimde Uzmanlık Tezi. Karabük, May 2007.
|
Demir, V., and D. P. Thompson "Vacuum Heat Treatment of MgO-Densified Pressureless Sintering Silicon Nitride Ceramics" Materials Science Forum Vol. 54 (2007) pp. 107-112
|
Demir, V. and D. P. Thompson "Vacuum Heat Treatment of MgO-Densified Pressureless Sintering Silicon Nitride Ceramics" Materials Science Forum Vol. 54 (2007) pp. 107-112
|
Demir V, Thompson D. P. "Pressureless Sintering of Si3N4 Ceramics with Oxide Additives in Different Packing Powder" Journal of Materials Science Vol. 40, No. 7. (April 2005), pp. 1763-1765
|
Vedat Demir and Adem Demir "Effect of Composition Variations on The Vitrification of The Blast Furnace and Basic Oxygen Furnace Slag" IX Conference & Exhibition of the European Ceramic Society 19-23 June, 2005, Partoz, Slovenia
|
Vedat Demir and Derek. P. Thompson "Sintering Behaviours of MgO plus Al2O3 Doped Silicon Nitride Ceramics" IX Conference & Exhibition of the European Ceramic Society 19-23 June, 2005, Partoz, Slovenia
|
Z. TATLİ, V. DEMİR, H. MANDAL, D.P. THOMPSON “Densification Behaviour of
Oxide-Coated Silicon Nitride Powders” 3. Uluslararası Seramik Konferansı
Vol.2, pp.92-98, 22-25 Ekim 1996, İstanbul
|
Columnist :
www.caybasihaber.com
|
| V. Demir "Akarsuların gücünden yararlanarak Su Pompası Tasarımı ve Üretimi" Agro-Endüstri Proje Pazarı, Ege Üniversitesi Atatürk Kültür Merkezi, 30-31 Mayıs 2002, İzmir |
V. Demir "Nehir Akışını Mekanik Enerjiye Çevirerek Elektrik Üretimi" Agro-Endüstri
Proje Pazari, Ege Üniversitesi Atatürk Kültür Merkezi, 30-31 Mayıs 2002,
İzmir
|
Vedat Demir “Baraj Kurmadan Elektrik Üretimi”, YENİ PARA Haftalık Ekonomi
Dergisi, Girişimci Dizisi 3, Türkiye’de Denenmemiş 50 Orijinal iş, Sayı:
2005/16, Sıra:7, Sayfa:11, 17–23 Nisan 2005, ISSN 1305-189X, (Ege Üniversite
Patenli)
|
Semester
|
Dersin Adı
|
Period of Week
|
|
Theoretical
|
Practices
|
||
Fall
|
Cold Shaping Techniques of Metals
|
4
|
4
|
Cold Shaping Technology of Metals
|
2
|
||
Cold Shaping Technology of Metals
|
4
|
4
|
|
Teaching Practice
|
2
|
||
ENGINEERING CERAMICS (MSc)
|
3
|
||
Fall
|
Technical Drawing
|
4
|
|
Cold Shaping Techniques of Metals
|
4
|
4
|
|
Cold Shaping Technology of Metals
|
2
|
||
Application of Project
|
4
|
4
|
|
Graduation Thesis
|
2
|
||
Teaching Practice
|
2
|
||
REFRACTORIES (MSc)
|
3
|
||
1
|
All areas of Ceramic Engineering for Sintering, Densification, All Testing and Analyzing
|
2
|
West for boron and Blast Furnace Stag use for industry
|
3
|
Hobby for Renewable Energy, specially power of water course
|
Postgraduate Studies (MPhil and PhD) in England, Higher Education Council (YOK) of Turkey, 1993-2000.
|
Articles on the Academic Journals (SCI, SSCI, AHCI) finally supported by Turkish Scientific and Technical Researches Institution (TUBITAK), 2005/2006/2007.
|